S&S Cycle 31-0055 Super Stock® Alternator Style Crankcase for 1992-'99 Big Twins with Stock Bore - Wrinkle Black

$1,995.95
Shipping calculated at checkout.

Pickup currently unavailable

S&S Cycle 31-0055

Perfect for stock replacement and high performance applications, these crankcases offer some unique features. Besides being machined for a crank position sensor, they are also compatible with stock flywheel assemblies, primary covers, gearcovers and are clearanced for 38 amp alternator stators.

Features and Benefits:

  • Relocated cam chest oil pick-up increases gear case scavenging and virtually eliminates oil carry-over at sustained high speeds
  • Machined to accept the stock oil filter assembly used on 1992–'99 big twins
  • A ported breather passageway and a machined breather window allows the air/oil mist to flow from the flywheel cavity to the cam chest of the engine with the least possible restriction
  • Crankcase venting can be achieved via two crankcase breathers, the cylinder heads, or both. We recommend using both crankcase breathers in engines larger than 95"
  • Clearanced for strokes as long as 5"
  • Compatible with stock 1984–'99 flywheel assemblies, primary covers, gearcovers, and clearanced for 38 amp alternator stators, making them perfect for stock replacement or high performance applications
  • Machined for installation of a crank position sensor. This allows the cases to be used in stock EFI applications and also allows easy installation of S&S IST® Ignition and VFI Fuel Injection. A plug kit is included for applications that do not use a crank position sensor



Options

  • Available for stock, 3 5/8", and 3 13/16" bore applications with deck heights as much as 3/16" taller than stock
  • Natural aluminum, black wrinkle powdercoat, and polished finish available
Crankcase Style Finish
 Part Number Notes
3 1/2" Bore (Stock) 3 5/8"
Bore 		3 5/8"
Bore
(Small Diameter) 		3 13/16"
Bore
1992–'99 Natural 31-0005 31-0077 31-0073 31-0032 1, 3, 4
Black 31-0055 31-0078 31-0075 –
Polished 31-0079 – –
NOTES: 1. 1992-'99 style oil pump. 2. 1984-'91 style oil pump. 3. Machined for 1984-'99 alloy primary. 4. Machined for stock or S&S EFI crank position sensor. Stock diameter only.




    • Note: All S&S crankcases manufactured after June 1, 2008 do not have case interlock groove and ring and do not use case alignment studs. Case mating surface is flat, and cases are aligned with alignment dowels.

Install Instructions Download

FITMENT DISCLAIMER

Fitment information is provided as a general reference only and is not guaranteed for any motorcycle, whether stock or modified. Compatibility may vary by year, model, and individual configuration.

Customers are responsible for verifying fitment prior to purchase. House of Harley-Davidson assumes no liability for purchases made based on incorrect or unverified fitment information.

Please contact our Parts Department with any questions before ordering at 414-282-2211