Feuling 4080

Maintain maximum valve lift!
Increased stiffness and column rigidity maximizing valve-train stability, increasing engine RPM horsepower and torque output.
Adjustable pushrods are tapered 3/8 4130 chrome moly adjustable pushrods, use a minimal adjustment parameter eliminating flex and loss of valve train-stability problems associated with most adjustable pushrods.
Individual length intake & exhaust pushrods keep the adjustment extension to a minimum
Designed to exceed the needs of performance engines using larger lift camshafts and high spring pressures, while maintaining proper and critical oil flow to top end valve gear.
RACE SERIES have 24 threads per inch with 0.145 wall thickness - recommended when extreme valve-spring pressures are used.
Designed for use with hydraulic or solid lifters and street or race engines
HP+ and RACE SERIES pushrods require removal of rocker covers and rocker arm supports, FEULING QUICK INSTALL rods can be installed without removing the rocker covers, arms and supports
FEULING pushrods can be used with the factory pushrod tubes.
Made in the U.S.A.

NOTE: RACE SERIES pushrods can be adjusted 0.225 longer than stock to accommodate longer cylinder and smaller base circle camshafts

*Rev B 1/28/19

FITS:

EVO 84-99, 3/8 OD Tube 0.145 Wall thickness, Individual length, require removal of top rocker cover and rocker housing for installation, Use factory pushrod tubes

COUNTRY OF ORIGIN:

USA

Disclaimer: Qualified Manufacturer Declared Replacement Part means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.

FITMENT DISCLAIMER

Fitment information is provided as a general reference only and is not guaranteed for any motorcycle, whether stock or modified. Compatibility may vary by year, model, and individual configuration.

Customers are responsible for verifying fitment prior to purchase. House of Harley-Davidson assumes no liability for purchases made based on incorrect or unverified fitment information.

Please contact our Parts Department with any questions before ordering at 414-282-2211